User guide
Table Of Contents
- Part1
- Part2
- Part2
- Part3
- Part4
- Part5
- Dynamic Link Aggregation
- Link Aggregation ID
- RADIUS
- Configuring RADIUS Server Settings
- Configuring IEEE802.1x
- Supported MIBs
- SNMP Traps
- Configuring SNMP
- Setting Up Login Accounts
- Requirements for Using SSH
- HTTPS Example
- Internet Explorer Warning Messages
- Netscape Navigator Warning Messages
- Login Screen
- Strict Priority Queuing (SPQ)
- Weighted Round Robin Scheduling (WRR)
- DiffServ
- DSCP and Per-Hop Behavior
- DHCP “Relay Agent Information Option”
- DHCP Relay Agent Circuit ID Sub-option Format
- Part6
- Part7
- Switch Configuration File
- Access Priority
- The Console Port
- Telnet
- List of Available Commands
- Detailed Command Information
- Logging Out
- User Mode
- Enable Mode
- Configure Mode
- config-vlan Commands
- interface Commands
- show system-information
- show hardware-monitor
- show ip
- show logging
- show interface
- show mac address-table
- Backing up Configuration
- Restoring Configuration
- Using a Different Configuration File
- Resetting to the Factory Default
- no mirror-port
- no https timeout
- no trunk
- no port-access-authenticator
- no ssh
- interface
- bpdu-control
- broadcast-limit
- bandwidth-limit
- mirror
- gvrp
- ingress-check
- frame-type
- vlan-trunking
- spq
- wrr
- egress set
- qos priority
- name
- speed-duplex
- Static Entries (SVLAN Table)
- Dynamic Entries (DVLAN Table)
- GARP Status
- GARP Timer
- GVRP Timer
- Enable GVRP
- Disable GVRP
- Set Port VID
- Set Acceptable Frame Type
- Enable or Disable Port GVRP
- Modify Static VLAN
- Delete VLAN ID
Dimension GS-3012 Gigabit Ethernet Switch
Introduction to CLI 28-11
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
inactive
Enables the specified MAC-filter
rule.
name <name> mac
<mac-addr> vlan
<vlan-id> drop
Disables the specified MAC filter
rule.
mirror-port
Disables port mirroring on the
switch.
lacp
Disables the link aggregation
control protocol (dynamic trunking)
on the switch.
trunk
<
T1|T2|T3|T4|T5|T6>
lacp
Disables LACP in the specified
trunk group.
<
T1|T2|T3|T4|T5|T6>
interface <port-
list>
Removes ports from the specified
trunk group.
<
T1|T2|T3|T4|T5|T6>
<cr>
Disables the specified trunk group.
igmp-snooping
Disables IGMP snooping.
bcp-transparency
Disables bridging control protocol
transparency such as STP.
storm-control
Disables broadcast storm control.
bandwidth-control
Disables bandwidth control.
vlan1q gvrp
Disables GVRP on the switch.
port-isolation
Disables port isolation.
spanning-tree
Disables STP.
<port-list>
Disables STP on listed ports.
timesync
Disables the time setting on the
timeserver.
radius-server
Disables the use of authentication
from the RADIUS server.
port-access-
authenticator
Disables port authentication on the
switch.