User guide

Dimension GS-3012 Gigabit Ethernet Switch
Introduction to CLI 28-13
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
option
Disables the relay agent
information option 82.
information
System name is not appended to
option 82 information field.
cluster
Disables cluster management on
the switch.
member <mac-
address>
Removes the cluster member.
ssh
key <rsa1|rsa|dsa>
Deletes the secure shell server
encryption key and regenerates a
new key. Your switch supports
SSH versions 1 and 2 using RSA
and DSA authentication.
known-hosts <host-
ip> <cr>
Removes the specified remote
hosts from the list of all known
hosts.
known-hosts <host-
ip> [1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts with
the specified public key (1024-bit
RSA1, RSA or DSA).
https timeout
Resets the session timeout to the
default of 300 seconds.
multi-login
Disables another administrator
from logging into Telnet or the CLI.
vlan-type <802.1q|port-based>
Specifies the VLAN type.
ip route <ip> <mask>
<next-hop-ip>
Creates a static route.
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route or
deactivates a static route.
name-server <ip>
Sets the IP address of a domain
name server.
address default-
gateway
<ip>
Sets the default gateway’s IP
address for the out-of-band
management port.
address <ip> <mask>
Sets the IP address and subnet
mask of the out-of-band
management port.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Configures a static MAC address
forwarding rule.