User guide
Table Of Contents
- Part1
- Part2
- Part2
- Part3
- Part4
- Part5
- Dynamic Link Aggregation
- Link Aggregation ID
- RADIUS
- Configuring RADIUS Server Settings
- Configuring IEEE802.1x
- Supported MIBs
- SNMP Traps
- Configuring SNMP
- Setting Up Login Accounts
- Requirements for Using SSH
- HTTPS Example
- Internet Explorer Warning Messages
- Netscape Navigator Warning Messages
- Login Screen
- Strict Priority Queuing (SPQ)
- Weighted Round Robin Scheduling (WRR)
- DiffServ
- DSCP and Per-Hop Behavior
- DHCP “Relay Agent Information Option”
- DHCP Relay Agent Circuit ID Sub-option Format
- Part6
- Part7
- Switch Configuration File
- Access Priority
- The Console Port
- Telnet
- List of Available Commands
- Detailed Command Information
- Logging Out
- User Mode
- Enable Mode
- Configure Mode
- config-vlan Commands
- interface Commands
- show system-information
- show hardware-monitor
- show ip
- show logging
- show interface
- show mac address-table
- Backing up Configuration
- Restoring Configuration
- Using a Different Configuration File
- Resetting to the Factory Default
- no mirror-port
- no https timeout
- no trunk
- no port-access-authenticator
- no ssh
- interface
- bpdu-control
- broadcast-limit
- bandwidth-limit
- mirror
- gvrp
- ingress-check
- frame-type
- vlan-trunking
- spq
- wrr
- egress set
- qos priority
- name
- speed-duplex
- Static Entries (SVLAN Table)
- Dynamic Entries (DVLAN Table)
- GARP Status
- GARP Timer
- GVRP Timer
- Enable GVRP
- Disable GVRP
- Set Port VID
- Set Acceptable Frame Type
- Enable or Disable Port GVRP
- Modify Static VLAN
- Delete VLAN ID
Dimension GS-3012 Gigabit Ethernet Switch
28-16 Introduction to CLI
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
policy <name> classifier
<classifier-list> <
[vlan<vlan-id>]
[egress-port <port-
num>]
[priority <0-7>]
[dscp <0-63>]
[tos <0-7>]
[bandwidth
<bandwidth>]
[outgoing-packet-
format
<tagged|untagged>]
[out-of-profile-
dscp <0-63>]
[forward-action
<drop|forward>]
[queue-action
<prio-set|prio-
queue|prio-replace-
tos>]
[diffserv-action
<diff-set-tos|diff-
replace-
priority|diff-set-
dscp>]
[outgoing-mirror]
[outgoing-eport]
[outgoing-non-
unicast-eport ]
[outgoing-set-vlan
]
[metering]
[out-of-profile-
action <[change-
dscp][drop][
forward]>]
[inactive]>
Configures a policy. A classifier
distinguishes traffic into flows
based on the configured criteria. A
policy rule ensures that a traffic
flow gets the requested treatment
in the network.
radius-server host <ip> [acct-
port <socket-
number>] [key <key-
string>]
Sets the IP address of the external
RADIUS server, UDP port and
shared key.
port-access-
authenticator
Enables 802.1x authentication on
the switch.
<port-list>
Enables 802.1x authentication on
the specified port(s).