User guide
Table Of Contents
- Part1
- Part2
- Part2
- Part3
- Part4
- Part5
- Dynamic Link Aggregation
- Link Aggregation ID
- RADIUS
- Configuring RADIUS Server Settings
- Configuring IEEE802.1x
- Supported MIBs
- SNMP Traps
- Configuring SNMP
- Setting Up Login Accounts
- Requirements for Using SSH
- HTTPS Example
- Internet Explorer Warning Messages
- Netscape Navigator Warning Messages
- Login Screen
- Strict Priority Queuing (SPQ)
- Weighted Round Robin Scheduling (WRR)
- DiffServ
- DSCP and Per-Hop Behavior
- DHCP “Relay Agent Information Option”
- DHCP Relay Agent Circuit ID Sub-option Format
- Part6
- Part7
- Switch Configuration File
- Access Priority
- The Console Port
- Telnet
- List of Available Commands
- Detailed Command Information
- Logging Out
- User Mode
- Enable Mode
- Configure Mode
- config-vlan Commands
- interface Commands
- show system-information
- show hardware-monitor
- show ip
- show logging
- show interface
- show mac address-table
- Backing up Configuration
- Restoring Configuration
- Using a Different Configuration File
- Resetting to the Factory Default
- no mirror-port
- no https timeout
- no trunk
- no port-access-authenticator
- no ssh
- interface
- bpdu-control
- broadcast-limit
- bandwidth-limit
- mirror
- gvrp
- ingress-check
- frame-type
- vlan-trunking
- spq
- wrr
- egress set
- qos priority
- name
- speed-duplex
- Static Entries (SVLAN Table)
- Dynamic Entries (DVLAN Table)
- GARP Status
- GARP Timer
- GVRP Timer
- Enable GVRP
- Disable GVRP
- Set Port VID
- Set Acceptable Frame Type
- Enable or Disable Port GVRP
- Modify Static VLAN
- Delete VLAN ID
Dimension GS-3012 Gigabit Ethernet Switch
Preface xix
Preface
Congratulations on your purchase from the Dimension series of switches.
This preface introduces you to the GS-3012 and discusses the conventions of this User’s Guide. It also provides
information on other related documentation.
About the GS-3012
There are two GS-3012 models. The GS-3012 DC model requires DC power supply input of -48 VDC to -60 VDC,
1.84A Max. The GS-3012 AC model requires 100~240VAC/1.5A power.
All figures in this guide display the GS-3012 AC model unless specifically noted otherwise.
The GS-3012 Gigabit Ethernet Switch is a managed switch with features ideally suited in an enterprise
environment. It can deliver broadband IP services to:
Multi-tenant unit (MTU) buildings (hotels, motels, resorts, residential multi-dwelling units, office
buildings, educational establishments, etc.)
Public facilities (convention centers, airports, plazas, train stations, etc.)
Enterprises.
It can also be deployed as a mini-POP (point-of-presence) in a building basement delivering 10/100/1000Mbps data
service over Category 5 wiring to each customer.
General Syntax Conventions
This guide shows you how to configure the switch using the web configurator and CLI commands. See the
online HTML help for information on individual web configurator screens.
Mouse action sequences are denoted using a comma. For example, click Start, Settings, Control Panel,
Network means first you click Start, click or move the mouse pointer over Settings, then click or move
the mouse pointer over Control Panel and finally click (or double-click) Network.
“Enter” means for you to type one or more characters. “Select” or “Choose” means for you to use one of
the predefined choices.
Predefined choices are in Bold Arial font.
Button and field labels, links and screen names in are in Bold Times New Roman font.
For brevity’s sake, we will use “e.g.” as shorthand for “for instance”, and “i.e.” as shorthand for “that is” or
“in other words” throughout this manual.
The ZyXEL Dimension GS-3012 Gigabit Ethernet Switch will be referred to as the “GS-3012”, the “GS”
or, simply, as “the switch” in this User’s Guide.