User guide
Table Of Contents
- Part1
- Part2
- Part2
- Part3
- Part4
- Part5
- Dynamic Link Aggregation
- Link Aggregation ID
- RADIUS
- Configuring RADIUS Server Settings
- Configuring IEEE802.1x
- Supported MIBs
- SNMP Traps
- Configuring SNMP
- Setting Up Login Accounts
- Requirements for Using SSH
- HTTPS Example
- Internet Explorer Warning Messages
- Netscape Navigator Warning Messages
- Login Screen
- Strict Priority Queuing (SPQ)
- Weighted Round Robin Scheduling (WRR)
- DiffServ
- DSCP and Per-Hop Behavior
- DHCP “Relay Agent Information Option”
- DHCP Relay Agent Circuit ID Sub-option Format
- Part6
- Part7
- Switch Configuration File
- Access Priority
- The Console Port
- Telnet
- List of Available Commands
- Detailed Command Information
- Logging Out
- User Mode
- Enable Mode
- Configure Mode
- config-vlan Commands
- interface Commands
- show system-information
- show hardware-monitor
- show ip
- show logging
- show interface
- show mac address-table
- Backing up Configuration
- Restoring Configuration
- Using a Different Configuration File
- Resetting to the Factory Default
- no mirror-port
- no https timeout
- no trunk
- no port-access-authenticator
- no ssh
- interface
- bpdu-control
- broadcast-limit
- bandwidth-limit
- mirror
- gvrp
- ingress-check
- frame-type
- vlan-trunking
- spq
- wrr
- egress set
- qos priority
- name
- speed-duplex
- Static Entries (SVLAN Table)
- Dynamic Entries (DVLAN Table)
- GARP Status
- GARP Timer
- GVRP Timer
- Enable GVRP
- Disable GVRP
- Set Port VID
- Set Acceptable Frame Type
- Enable or Disable Port GVRP
- Modify Static VLAN
- Delete VLAN ID

Dimension GS-3012 Gigabit Ethernet Switch
Product Specifications A-3
Chart 2 Performance and Management Specifications
Interface MIB RFC 2863
Ping and Trace Route RFC 2925
Chart 3 Physical and Environmental Specifications
Weight Main switch: 6Kg
LED
Main switch: BPS, PWR, SYS, ALM,
Per Port: LNK/ACT, FDX
Per GBIC Slot: LNK, ACT
Per Management Port: 10, 100
Dimensions
Main switch:
438(W) x 300(D) x 44.45(H) mm
(17.3(W) x 8.9(D) x 2.6(H) inches), 19-inch rack-mount width, 1 U height
Power Supply (AC Unit) 100 - 240VAC 50/60Hz 1.5A max internal universal power supply
Power Supply (DC Unit)
DC input of -48VDC--60VDC, 1.84A Max.
Power Consumption Main switch: 35W maximum
Fuse Rating
T2A250VAC
Caution: For continued protection against risk of fire, replace only with the same type
and fuse rating.
Operating Temperature 0ºC ~45ºC (32ºF to 113ºF)
Storage Temperature -25ºC ~70ºC
Operational Humidity 10% to 90% (Non-condensing)
Safety
UL 60950-1
CSA 60950-1
EN60950-1
IEC60950 -1
ITU-T K.2 1 (Version 2000)
EMC
FCC Part15 (Class A)
CE-EMC (Class A)