User guide

Dimension GS-3012 Gigabit Ethernet Switch
Filtering 9-1
This chapter discusses static IP and MAC address port filtering.
9.1 Introduction to Filtering
Filtering means sifting traffic going through the switch based on the source and/or destination MAC addresses and
VLAN group (ID).
9.2 Configuring a Filtering Rule
Click Advanced Application and Filtering to display the screen as shown next.
Figure 9-1 Filtering
The following table describes the related labels in this screen.
Table 9-1 Filtering
LABEL DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.
Name Type a descriptive name for this filter rule. This is for identification purpose only.
Chapter 9
Filtering