User`s guide

Chapter 45 Cluster Management
GS3700/XGS3700 Series User’s Guide
369
The following table explains some of the FTP parameters.
45.3 Clustering Management Configuration
Use this screen to configure clustering management. Click Configuration from the Cluster
Management screen to display the next screen.
Figure 251 Management > Clustering Management > Configuration
Table 190 FTP Upload to Cluster Member Example
FTP PARAMETER DESCRIPTION
User
Enter “admin”.
Password
The web configurator password default is 1234.
ls
Enter this command to list the name of cluster member switch’s firmware
and configuration file.
410AAGB0.bin
This is the name of the firmware file you want to upload to the cluster
member switch.
ras-00-a0-c5-01-23-46
This is the cluster member switch’s firmware name as seen in the cluster
manager switch.
config-00-a0-c5-01-23-46
This is the cluster member switch’s configuration file name as seen in the
cluster manager switch.
EXAMPLE