User`s guide

ZyXEL MAX-200M1 Series User’s Guide
216 Appendix A
Table 93 Physical Features
FEATURE DESCRIPTION
Auto-crossover 10/100 Mbps
Ethernet Interface
This interface automatically adjusts to either a crossover or straight-
through Ethernet cable.
External Antenna The ZyXEL Device is equipped with an attached antenna to provide a
clear radio connection with the WiMAX base station.
Telephone Port Connect an analog telephone to the ZyXEL Device’s LINE port (RJ-11
connector) to take advantage of its Voice over IP (VoIP) features.
Reset Button The reset button is built into the rear panel. Use this button to restore
the factory default password to 1234; IP address to 192.168.1.1,
subnet mask to 255.255.255.0 and DHCP server enabled with a pool
of 32 IP addresses starting at 192.168.1.33.
Table 94 Non-Physical Features
FEATURE DESCRIPTION
High Speed Wireless Internet
Access
The ZyXEL Device is ideal for high-speed wireless Internet browsing.
WiMAX (Worldwide Interoperability for Microwave Access) is a
wireless networking standard providing high-bandwidth, wide-range
secured wireless service. The ZyXEL Device is a WiMAX mobile
station (MS) compatible with the IEEE 802.16e standard.
Firewall The ZyXEL Device is a stateful inspection firewall with DoS (Denial of
Service) protection. By default, when the firewall is activated, all
incoming traffic from the WAN to the LAN is blocked unless it is
initiated from the LAN. The ZyXEL Device’s firewall supports TCP/UDP
inspection, DoS detection and prevention, real time alerts, reports and
logs.
Content Filtering The ZyXEL Device can block access to web sites containing specified
keywords. You can define time periods and days during which content
filtering is enabled and include or exclude a range of users on the LAN
from content filtering.
Any IP The Any IP feature allows a computer to access the Internet and the
ZyXEL Device without changing the network settings (such as IP
address and subnet mask) of the computer, when the IP addresses of
the computer and the ZyXEL Device are not in the same subnet.
Auto Provisioning Your Internet service provider can automatically update your device’s
configuration via an auto-provisioning server.
Auto Firmware Upgrade Your device gives you the option to upgrade to a newer firmware
version if it finds one during auto-provisioning. Your VoIP service
provider must have an auto-provisioning server and a server set up
with firmware in order for this feature to work.
Network Address Translation
(NAT)
Network Address Translation (NAT) allows the translation of an
Internet protocol address used within one network (for example a
private IP address used in a local network) to a different IP address
known within another network (for example a public IP address used
on the Internet).
Universal Plug and Play
(UPnP)
Your device and other UPnP enabled devices can use the standard
TCP/IP protocol to dynamically join a network, obtain an IP address
and convey their capabilities to each other.