Chapter 18 Product Specifications Table 69 Voice Features Firmware update enable / disable If your service provider uses this feature, you hear a recorded message when you pick up the phone when new firmware is available for your WiMAX Modem. Enter *99# in your phone’s keypad to have the WiMAX Modem upgrade the firmware, or enter #99# to not upgrade. If your service provider gave you different numbers to use, enter them instead. If you enter the code to not upgrade, you can make a call as normal.
Chapter 18 Product Specifications Table 70 Star (*) and Pound (#) Code Support *0 Wireless Operator Services *2 Customer Care Access *66 Repeat Dialing *67 Plus the 10 digit phone number to block Caller ID on a single call basis *69 Return last call received *70 Followed by the 10 digit phone number to cancel Call Waiting on a single call basis *72 Activate Call Forwarding (*72 followed by the 10 digit phone number that is requesting call forwarding service) *720 Activate Call Forwarding (*7
Chapter 18 Product Specifications 184 User’s Guide
P ART VII Appendices and Index WiMAX Security (187) Setting Up Your Computer’s IP Address (191) Pop-up Windows, JavaScripts and Java Permissions (219) IP Addresses and Subnetting (229) Importing Certificates (241) SIP Passthrough (273) Common Services (275) Legal Information (279) Customer Support (313) 185
186
APPENDIX A WiMAX Security Wireless security is vital to protect your wireless communications. Without it, information transmitted over the wireless network would be accessible to any networking device within range. User Authentication and Data Encryption The WiMAX (IEEE 802.16) standard employs user authentication and encryption to ensure secured communication at all times. User authentication is the process of confirming a user’s identity and level of authorization.
Appendix A WiMAX Security RADIUS RADIUS is based on a client-server model that supports authentication, authorization and accounting. The base station is the client and the server is the RADIUS server. The RADIUS server handles the following tasks: • Authentication Determines the identity of the users. • Authorization Determines the network services available to authenticated users once they are connected to the network. • Accounting Keeps track of the client’s network activity.
Appendix A WiMAX Security the network. In addition to the shared key, password information exchanged is also encrypted to protect the network from unauthorized access. Diameter Diameter (RFC 3588) is a type of AAA server that provides several improvements over RADIUS in efficiency, security, and support for roaming. Security Association The set of information about user authentication and data encryption between two computers is known as a security association (SA).
Appendix A WiMAX Security Authentication The WiMAX Modem supports EAP-TTLS authentication. EAP-TTLS (Tunneled Transport Layer Service) EAP-TTLS is an extension of the EAP-TLS authentication that uses certificates for only the server-side authentications to establish a secure connection (with EAPTLS digital certifications are needed by both the server and the wireless clients for mutual authentication).
APPENDIX B Setting Up Your Computer’s IP Address Note: Your specific ZyXEL device may not support all of the operating systems described in this appendix. See the product specifications for more information about which operating systems are supported. This appendix shows you how to configure the IP settings on your computer in order for it to be able to communicate with the other devices on your network.
Appendix B Setting Up Your Computer’s IP Address Windows XP/NT/2000 The following example uses the default Windows XP display theme but can also apply to Windows 2000 and Windows NT. 1 Click Start > Control Panel. Figure 70 Windows XP: Start Menu 2 In the Control Panel, click the Network Connections icon.
Appendix B Setting Up Your Computer’s IP Address 3 Right-click Local Area Connection and then select Properties. Figure 72 Windows XP: Control Panel > Network Connections > Properties 4 On the General tab, select Internet Protocol (TCP/IP) and then click Properties.
Appendix B Setting Up Your Computer’s IP Address 5 The Internet Protocol TCP/IP Properties window opens. Figure 74 Windows XP: Internet Protocol (TCP/IP) Properties 6 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP.
Appendix B Setting Up Your Computer’s IP Address Windows Vista This section shows screens from Windows Vista Professional. 1 Click Start > Control Panel. Figure 75 Windows Vista: Start Menu 2 In the Control Panel, click the Network and Internet icon. Figure 76 Windows Vista: Control Panel 3 Click the Network and Sharing Center icon.
Appendix B Setting Up Your Computer’s IP Address 4 Click Manage network connections. Figure 78 Windows Vista: Network and Sharing Center 5 Right-click Local Area Connection and then select Properties. Figure 79 Windows Vista: Network and Sharing Center Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue.
Appendix B Setting Up Your Computer’s IP Address 6 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties.
Appendix B Setting Up Your Computer’s IP Address 7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. Figure 81 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically.
Appendix B Setting Up Your Computer’s IP Address Mac OS X: 10.3 and 10.4 The screens in this section are from Mac OS X 10.4 but can also apply to 10.3. 1 Click Apple > System Preferences. Figure 82 Mac OS X 10.4: Apple Menu 2 In the System Preferences window, click the Network icon. Figure 83 Mac OS X 10.
Appendix B Setting Up Your Computer’s IP Address 3 When the Network preferences pane opens, select Built-in Ethernet from the network connection type list, and then click Configure. Figure 84 Mac OS X 10.4: Network Preferences 4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP tab. Figure 85 Mac OS X 10.4: Network Preferences > TCP/IP Tab.
Appendix B Setting Up Your Computer’s IP Address 5 For statically assigned settings, do the following: • From the Configure IPv4 list, select Manually. • In the IP Address field, type your IP address. • In the Subnet Mask field, type your subnet mask. • In the Router field, type the IP address of your device. Figure 86 Mac OS X 10.
Appendix B Setting Up Your Computer’s IP Address Click Apply Now and close the window.Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network Interface from the Info tab. Figure 87 Mac OS X 10.
Appendix B Setting Up Your Computer’s IP Address Mac OS X: 10.5 The screens in this section are from Mac OS X 10.5. 1 Click Apple > System Preferences. Figure 88 Mac OS X 10.5: Apple Menu 2 In System Preferences, click the Network icon. Figure 89 Mac OS X 10.
Appendix B Setting Up Your Computer’s IP Address 3 When the Network preferences pane opens, select Ethernet from the list of available connection types. Figure 90 Mac OS X 10.5: Network Preferences > Ethernet 4 From the Configure list, select Using DHCP for dynamically assigned settings. 5 For statically assigned settings, do the following: • From the Configure list, select Manually. • In the IP Address field, enter your IP address. • In the Subnet Mask field, enter your subnet mask.
Appendix B Setting Up Your Computer’s IP Address • In the Router field, enter the IP address of your WiMAX Modem. Figure 91 Mac OS X 10.5: Network Preferences > Ethernet 6 Click Apply and close the window.
Appendix B Setting Up Your Computer’s IP Address Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network interface from the Info tab. Figure 92 Mac OS X 10.5: Network Utility Linux: Ubuntu 8 (GNOME) This section shows you how to configure your computer’s TCP/IP settings in the GNU Object Model Environment (GNOME) using the Ubuntu 8 Linux distribution.
Appendix B Setting Up Your Computer’s IP Address 1 Click System > Administration > Network. Figure 93 Ubuntu 8: System > Administration Menu 2 When the Network Settings window opens, click Unlock to open the Authenticate window. (By default, the Unlock button is greyed out until clicked.) You cannot make changes to your configuration unless you first enter your admin password.
Appendix B Setting Up Your Computer’s IP Address 3 In the Authenticate window, enter your admin account name and password then click the Authenticate button. Figure 95 Ubuntu 8: Administrator Account Authentication 4 In the Network Settings window, select the connection that you want to configure, then click Properties.
Appendix B Setting Up Your Computer’s IP Address 5 The Properties dialog box opens. Figure 97 Ubuntu 8: Network Settings > Properties • In the Configuration list, select Automatic Configuration (DHCP) if you have a dynamic IP address. • In the Configuration list, select Static IP address if you have a static IP address. Fill in the IP address, Subnet mask, and Gateway address fields. 6 Click OK to save the changes and close the Properties dialog box and return to the Network Settings screen.
Appendix B Setting Up Your Computer’s IP Address 7 If you know your DNS server IP address(es), click the DNS tab in the Network Settings window and then enter the DNS server information in the fields provided. Figure 98 Ubuntu 8: Network Settings > DNS 8 Click the Close button to apply the changes.
Appendix B Setting Up Your Computer’s IP Address tab. The Interface Statistics column shows data if your connection is working properly.
Appendix B Setting Up Your Computer’s IP Address Linux: openSUSE 10.3 (KDE) This section shows you how to configure your computer’s TCP/IP settings in the K Desktop Environment (KDE) using the openSUSE 10.3 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default openSUSE 10.3 installation. Note: Make sure you are logged in as the root administrator.
Appendix B Setting Up Your Computer’s IP Address 2 When the Run as Root - KDE su dialog opens, enter the admin password and click OK. Figure 101 openSUSE 10.3: K Menu > Computer Menu 3 When the YaST Control Center window opens, select Network Devices and then click the Network Card icon. Figure 102 openSUSE 10.
Appendix B Setting Up Your Computer’s IP Address 4 When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. Figure 103 openSUSE 10.
Appendix B Setting Up Your Computer’s IP Address 5 When the Network Card Setup window opens, click the Address tab Figure 104 openSUSE 10.3: Network Card Setup 6 Select Dynamic Address (DHCP) if you have a dynamic IP address. Select Statically assigned IP Address if you have a static IP address. Fill in the IP address, Subnet mask, and Hostname fields. 7 Click Next to save the changes and close the Network Card Setup window.
Appendix B Setting Up Your Computer’s IP Address 8 If you know your DNS server IP address(es), click the Hostname/DNS tab in Network Settings and then enter the DNS server information in the fields provided. Figure 105 openSUSE 10.3: Network Settings 9 216 Click Finish to save your settings and close the window.
Appendix B Setting Up Your Computer’s IP Address Verifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Connection Information. Figure 106 openSUSE 10.3: KNetwork Manager When the Connection Status - KNetwork Manager window opens, click the Statistics tab to see if your connection is working properly.
Appendix B Setting Up Your Computer’s IP Address 218 User’s Guide
APPENDIX C Pop-up Windows, JavaScripts and Java Permissions In order to use the web configurator you need to allow: • Web browser pop-up windows from your device. • JavaScripts (enabled by default). • Java permissions (enabled by default). Note: Internet Explorer 6 screens are used here. Screens for other Internet Explorer versions may vary. Internet Explorer Pop-up Blockers You may have to disable pop-up blocking to log into your device.
Appendix C Pop-up Windows, JavaScripts and Java Permissions 1 In Internet Explorer, select Tools, Internet Options, Privacy. 2 Clear the Block pop-ups check box in the Pop-up Blocker section of the screen. This disables any web pop-up blockers you may have enabled. Figure 109 Internet Options: Privacy 3 Click Apply to save this setting. Enable Pop-up Blockers with Exceptions Alternatively, if you only want to allow pop-up windows from your device, see the following steps.
Appendix C Pop-up Windows, JavaScripts and Java Permissions 2 Select Settings…to open the Pop-up Blocker Settings screen. Figure 110 Internet Options: Privacy 3 Type the IP address of your device (the web page that you do not want to have blocked) with the prefix “http://”. For example, http://192.168.167.1.
Appendix C Pop-up Windows, JavaScripts and Java Permissions 4 Click Add to move the IP address to the list of Allowed sites. Figure 111 Pop-up Blocker Settings 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. JavaScripts If pages of the web configurator do not display properly in Internet Explorer, check that JavaScripts are allowed.
Appendix C Pop-up Windows, JavaScripts and Java Permissions 1 In Internet Explorer, click Tools, Internet Options and then the Security tab. Figure 112 Internet Options: Security 2 Click the Custom Level... button. 3 Scroll down to Scripting. 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default).
Appendix C Pop-up Windows, JavaScripts and Java Permissions 6 Click OK to close the window. Figure 113 Security Settings - Java Scripting Java Permissions 224 1 From Internet Explorer, click Tools, Internet Options and then the Security tab. 2 Click the Custom Level... button. 3 Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected.
Appendix C Pop-up Windows, JavaScripts and Java Permissions 5 Click OK to close the window. Figure 114 Security Settings - Java JAVA (Sun) 1 From Internet Explorer, click Tools, Internet Options and then the Advanced tab. 2 Make sure that Use Java 2 for
Appendix C Pop-up Windows, JavaScripts and Java Permissions 3 Click OK to close the window. Figure 115 Java (Sun) Mozilla Firefox Mozilla Firefox 2.0 screens are used here. Screens for other versions may vary. You can enable Java, Javascripts and pop-ups in one screen. Click Tools, then click Options in the screen that appears.
Appendix C Pop-up Windows, JavaScripts and Java Permissions Click Content.to show the screen below. Select the check boxes as shown in the following screen.
Appendix C Pop-up Windows, JavaScripts and Java Permissions 228 User’s Guide
APPENDIX D IP Addresses and Subnetting This appendix introduces IP addresses and subnet masks. IP addresses identify individual devices on a network. Every networking device (including computers, servers, routers, printers, etc.) needs an IP address to communicate across the network. These networking devices are also known as hosts. Subnet masks determine the maximum number of possible hosts on a network. You can also use subnet masks to divide one network into multiple sub-networks.
Appendix D IP Addresses and Subnetting The following figure shows an example IP address in which the first three octets (192.168.1) are the network number, and the fourth octet (16) is the host ID. Figure 118 Network Number and Host ID How much of the IP address is the network number and how much is the host ID varies according to the subnet mask.
Appendix D IP Addresses and Subnetting By convention, subnet masks always consist of a continuous sequence of ones beginning from the leftmost bit of the mask, followed by a continuous sequence of zeros, for a total number of 32 bits. Subnet masks can be referred to by the size of the network number part (the bits with a “1” value). For example, an “8-bit mask” means that the first 8 bits of the mask are ones and the remaining 24 bits are zeroes.
