User manual

Chapter 11 Tools
PLA450 User’s Guide
106
" Do not turn off the PLA450 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait five minutes before logging into
the PLA450 again.
Figure 56 Upload Warning
The PLA450 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 57 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
Figure 58 Upload Error Message