User manual

Chapter 4 Introducing the Web Configurator
PLA450 User’s Guide
40
4.4.2 Navigation Panel
After you enter the password, use the sub-menus on the navigation panel to configure PLA450
features.
The following table describes the sub-menus.
Rate For the LAN port, this displays the port speed and duplex setting or N/A
when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.
For the HomePlug AV port it displays the maximum transmission rate
when HomePlug AV is enabled.
Summary
Packet Statistics Click Details to view port status and packet specific statistics.
WLAN Station Status Click Details to view the wireless stations that are currently associated to
the PLA450.
My HomePlug
Network
Click Details to view information on the stations connected to your Home
Plug network.
Table 4 Web Configurator Status Screen (continued)
LABEL DESCRIPTION
Table 5 Screens Summary
LINK TAB FUNCTION
Status This screen shows the PLA450’s general device, system and
interface status information. Use this screen to access the
summary statistics tables.
Network
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the PLA450 to block access
to devices or block the devices from accessing the PLA450.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
WPS Use this screen to configure Wi-Fi Protected Setup (WPS) settings.
WPS Station Use this screen to use WPS to set up your wireless network.
LAN IP Use this screen to configure LAN IP address and subnet mask.
HomePlug Network
Settings
Use this screen to configure HomePlug AV devices and set up a
powerline network.
QoS Use this screen to configure HomePlug AV Quality of Service. This
allows you to prioritize powerline traffic according to the delivery
requirements of individual services.
Maintenance
System General Use this screen to view and change administrative settings such as
system and domain names, password and inactivity timer.
Time Setting Use this screen to change your PLA450’s time and date.