User manual

Chapter 4 Introducing the Web Configurator
PLA450 User’s Guide
41
4.4.3 Summary: Packet Statistics
Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information
here includes port status and packet specific statistics. Also provided are "system up time" and
"poll interval(s)". The Poll Interval(s) field is configurable.
Figure 11 Summary: Packet Statistics
The following table describes the labels in this screen.
Logs View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your PLA450’s log settings.
To o l s Firmware Use this screen to upload firmware to your PLA450.
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your PLA450.
Restart This screen allows you to reboot the PLA450 without turning the
power off.
Config Mode General This screen allows you to display or hide the advanced screens or
features.
Language Language This allows you to change the web configurator’s language
settings.
Table 5 Screens Summary
LINK TAB FUNCTION
Table 6 Summary: Packet Statistics
LABEL DESCRIPTION
Port This is the PLA450’s port type.
Status For the LAN ports, this displays the port speed and duplex setting or Down
when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and Down when the WLAN is disabled.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.