User manual

Chapter 6 Wireless LAN
PLA450 User’s Guide
69
See the rest of this chapter for information on the other labels in this screen.
6.6.1 No Security
Select No Security to allow wireless stations to communicate with the access points without
any data encryption.
" If you do not enable any wireless security on your PLA450, your network is
accessible to any wireless networking device that is within range.
Figure 35 Network > Wireless LAN > General: No Security
The following table describes the labels in this screen.
Channel
Selection
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
IEEE 802.11 mode you are using and the country you are in.
Refer to Appendix D on page 159 for more information on channels.
Operating
Channel
This displays the channel the PLA450 is currently using.
Apply Click Apply to save your changes back to the PLA450.
Reset Click Reset to reload the previous configuration for this screen.
Table 12 Network > Wireless LAN > General
LABEL DESCRIPTION
Table 13 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the PLA450.
Reset Click Reset to reload the previous configuration for this screen.