User manual

Chapter 7 LAN
PLA450 User’s Guide
83
User Defined LAN
IP
Select this option to use a specific (fixed) IP address.
IP Address Enter the PLA450’s IP address in dotted decimal notation. 192.168.1.2 is the
factory default.
IP Subnet Mask Enter the IP subnet mask in this field if you have a specific IP address for the
PLA450 to use.
The subnet mask specifies the network number portion of an IP address. Your
PLA450 automatically calculates the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the PLA450.
Gateway IP
Address
Enter a gateway IP address in this field if you have a specific IP address for the
PLA450 to use.
Apply Click Apply to save your changes back to the PLA450.
Reset Click Reset to begin configuring this screen afresh.
Table 22 Network > LAN > IP
LABEL DESCRIPTION