User manual

64 Dial-In Configuration
Figure 6-3 Menu 13 - Default Dial-in Setup
From the Main Menu, enter 13 to go to Menu 13 - Default Dial-in
Setup. This section will describe how to configure the protocol-
independent fields in this menu. For the protocol-dependent fields, refer
to the appropriate chapters.
1. Telco Options: CLID Authen. - This field sets the CLID
authentication parameter for all incoming calls. There are three
options for this field:
• None - No CLID is required.
• Required - Must provide CLID, or call is disconnected.
• Preferred - If the CLID is available then CLID will be used to
do authentication. If the CLID is not available the call will
continue.
2. PPP Options: Recv. Authen. - This field sets the authentication
protocol used for incoming calls. User names and passwords are
configured in the next section (Remote users/Dial-in Users Setup).
Options for this field are:
• CHAP/PAP - Prestige will try CHAP first, but PAP will be
used if CHAP is not available.
• CHAP - Use CHAP only.