User manual

TCP/IP Configuration 77
Figure 7-5 Menu 12 - Static Route Setup - Main Menu
Figure 7-6 IP Static Route Setup
1. Route Name - Enter a descriptive name for this route. This is for
identification purpose only.
2. Active - This fields allows you to activate/deactivate this static
route.
3. Destination IP Address - This parameter specifies the IP
network address of the final destination. Routing is always based
on network number. If you need to specify a route to a single host,
use a subnet mask of 255.255.255.255 in the subnet mask field to
force the network number to be identical to the host ID.