User's Manual
Table Of Contents
- User’s Guide
- Introduction and Configuration
- Getting Started
- Tutorial
- Wireless LANs
- ZyXEL Utility
- Maintenance
- Troubleshooting and Specifications
- Appendices and Index
Chapter 4 ZyXEL Utility
NWD-270N User’s Guide
66
4.6.2 WPS: PIN - Use this Device’s PIN
This screen allows you to use the WPS Personal Identification Number mode, by entering the
NWD-270N’s unique PIN in the configuration utility of the other WPS-enabled device. See
Section 3.4.2 on page 42 for more information. Select WPS and PIN - Use this Device’s PIN
in the Adapter screen. The following screen displays.
Figure 44 WPS: PIN - Use this Device’s PIN
The following table describes the labels in this screen.
Table 18 WPS: PIN - Use this Device’s PIN
LABEL DESCRIPTION
This device’s PIN This is the NWD-270N’s Personal Identification Number (PIN). This
field is read-only. Enter the number that displays in this field into the
configuration interface of the other WPS-enabled device.
Note: Each time this screen displays, the PIN is
different. The PIN is valid for only one WPS
transaction.
Start Click this to start WPS. You must start WPS on the other WPS-
enabled device within two minutes.