IP Phone User Manual

P2302R-P1C Support Notes

All contents Copyright  2007 ZyXEL Communications Corporation.

 Filter log

This message is available when the 'Log' is enabled in the filter rule setting. The message consists of the packet

header and the log of the filter rules.

Format:

sdcmdSyslogSend(SYSLOG_FILLOG, SYSLOG_NOTICE, String );

String = IP[Src=xx.xx.xx.xx Dst=xx.xx.xx.xx prot spo=xxxx dpo=xxxx]S04>R01mD

IP[...] is the packet header and S04>R01mD means filter set 4 (S) and rule 1 (R), match (m) drop (D).

Src: Source Address

Dst: Destination Address

prot: Protocol (TCP,UDP,ICMP)

spo: Source port

dpo: Destination port

Example:

Jul 19 14:44:09 192.168.1.1 ZyXEL Communications Corp.: IP[Src=202.132.154.1 Dst=192.168.1.33 UDP

spo=0035 dpo=05d4]}S03>R01mF

Jul 19 14:44:13 192.168.1.1 ZyXEL Communications Corp.: IP[Src=192.168.1.33 Dst=202.132.154.1

ICMP]}S03>R01mF

 PPP Log

Format:

sdcmdSyslogSend( SYSLOG_PPPLOG, SYSLOG_NOTICE, String );

String = ppp:Proto Starting / ppp:Proto Opening / ppp:Proto Closing / ppp:Proto Shutdown

Proto = LCP / ATCP / BACP / BCP / CBCP / CCP / CHAP/ PAP / IPCP /IPXCP

Example:

Jul 19 11:43:25 192.168.1.1 ZyXEL Communications Corp.: ppp:LCP Starting

Jul 19 11:43:29 192.168.1.1 ZyXEL Communications Corp.: ppp:IPCP Starting

Jul 19 11:43:34 192.168.1.1 ZyXEL Communications Corp.: ppp:CCP Starting

Jul 19 11:43:38 192.168.1.1 ZyXEL Communications Corp.: ppp:BACP Starting

Jul 19 11:43:43 192.168.1.1 ZyXEL Communications Corp.: ppp:IPCP Opening