P-2602HWUDL-D 802.11g Wireless ADSL VoIP IAD with Built-in DECT Base Station Quick Start Guide Version 3.40 8/2007 Edition 1 DEFAULT LOGIN IP Address http://192.168.1.1 Password 1234 Copyright © 2007. All rights reserved.
P-2602HWUDL-D Quick Start Guide Overview The P-2602HWUDL-D model is a router which combines high-speed ADSL Internet access, a built-in switch, a firewall and high-speed wireless networking capability. It also has a built-in DECT GAP base station for compatibility with DECT cordless phones, USB 2.0 ports for sharing files via USB compatible storage devices and one phone port for making calls over the Internet (Voice over IP or VoIP).
P-2602HWUDL-D Quick Start Guide To read the User’s Guide insert the CD that came in the box into your CD-ROM drive. A screen should pop up. Navigate to the User’s Guide from this screen. If a screen does not pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually drive D:) and navigate to it from there. 2 Hardware Connections 1 DSL: Use a telephone wire to connect this port to the DSL or MODEM jack on a splitter.
P-2602HWUDL-D Quick Start Guide " When the ZyXEL Device does not have power, the phone(s) connected to the PHONE port can still be used for making PSTN calls. 3 PHONE: Use a telephone cable (and any telephone adaptor provided with your P2602HWUDL-D) to connect your telephone to this port. 4 USB 2.0: Connect a USB (version 2.0 or lower) memory stick for file sharing. The P2602HWUDL-D automatically detects the USB device. 5 USB 2.0: Use a USB cable (not provided) to connect a USB (version 2.
P-2602HWUDL-D Quick Start Guide If the PHONE light is on, skip to Section 6 to see how to make calls through the Internet. If the INTERNET light comes on but the PHONE light is off, go to Section 4.3 and use the VOICE OVER INTERNET SETUP wizard. If the INTERNET light is off but the DSL light is on, go to Section 4 and use the INTERNET/ WIRELESS SETUP to configure your Internet access settings. V Check your connections if an LED does not turn on.
P-2602HWUDL-D Quick Start Guide 2 Put your DECT phone in registration mode. Refer to your DECT phone documentation. When the P-2602HWUDL-D is in registration mode, the DECT light blinks and the P2602HWUDL-D starts to scan its surrounding area for DECT phones in registration mode. " To ensure clear communication between the two devices, make sure your DECT phone is within range of the P-2602HWUDL-D during the registration process. See the User’s Guide for details.
P-2602HWUDL-D Quick Start Guide Once your DECT phones are registered with the P-2602HWUDL-D you can assign SIP accounts to make and receive VoIP calls. You can also use DECT phones to make internal calls, see your DECT phone documentation for more information. Internal calls are calls between DECT phones registered with the P-2602HWUDL-D. For the P-2602HWUDL-D you can also assign your DECT phones to receive calls from the PSTN line (regular phone line).
P-2602HWUDL-D Quick Start Guide 5 Click Go to Wizard setup. 4.1 Internet/Wireless Setup The connection wizard helps you set up your Internet connection as well as your wireless settings. 1 Click INTERNET/WIRELESS SETUP. Wait while the P-2602HWUDL-D tries to detect your Internet connection. If the P2602HWUDL-D cannot detect your Internet connection, follow the directions. Enter the information provided by your ISP. Keep the default settings if your ISP did not provide some information.
P-2602HWUDL-D Quick Start Guide " " Enter the Internet access information exactly as given to you by your ISP in each wizard screen and then click Next to continue or click Back to return to the previous screen. Current screen information will be lost if you click Back. 4.2 Setting Up a Wireless Network To set up a wireless network you need at least one wireless network card/adapter. • If you have a desktop computer, use either a wireless USB adapter or a wireless PCI adapter.
P-2602HWUDL-D Quick Start Guide Enter the information provided by your VoIP service provider. Keep the default settings if your VoIP service provider did not provide some information. If you have a SIP account like 1234567@VoIP-provider.com, the SIP Number is 1234567, and the SIP Service Domain is VoIP-provider.com. When you are done, the PHONE light should be on. Close the wizard and the main screen opens.
P-2602HWUDL-D Quick Start Guide • If you want to dial a SIP number that only uses numbers (for example, “12345”), dial the number on your phone’s keypad. You can also set up a speed-dial entry, if you want. See the User’s Guide for instructions. • If you want to dial a SIP number that uses letters or if you want to make a peer-to-peer call, set up a speed-dial entry first. See the User’s Guide for instructions. Then, dial the speeddial number to make the call.
P-2602HWUDL-D Quick Start Guide example of a VoIP trunking call. A calls the P-2602HWUDL-D (B), B makes a VoIP connection to another VoIP trunking device C and C forwards the call to a PSTN phone D. See the User’s Guide for information on how to configure VoIP trunking. 8 USB File Sharing This section shows you how to enable USB file sharing. In order to start file sharing you need to: • Connect your USB 2.0 file sharing device. See Section 2. • Enable the file sharing feature.
P-2602HWUDL-D Quick Start Guide 4 Select Active in the User Configuration Setting section and fill in the User Name and Password fields. Retype your password and click Apply. The P-2602HWUDL-D automatically recognizes the USB device which is connected to the USB port and makes it available for sharing. 8.2 Browse to the USB File Share 1 In Windows Explorer’s Address bar type a double backslash “\\” followed by the IP address of the P2602HWUDL-D (192.168.1.1 is the default) and hit [ENTER].
P-2602HWUDL-D Quick Start Guide structure and you can manage those files just like any other files on your computer. " Refer to the User’s Guide for a complete description of this feature. Troubleshooting V If you cannot access the P-2602HWUDL-D, follow these steps. 1 Check the device’s lights. If they are different than what is described in Section 2, make sure the connections are correct, and inspect your cables for damage.
P-2602HWUDL-D Quick Start Guide V If you can access the Internet, but you cannot make calls through the Internet, follow these steps. 1 Check the PHONE lights. If neither of them is on, Make sure that your telephone is connected to the corresponding PHONE port. 2 Make sure the VOICE OVER INTERNET SETUP wizard screens are properly configured (see Section 4.3). 3 You can also check the VoIP status in the Status screen. See the User’s Guide for more information about this screen.