VDSL Hospitality Setup Guide For 100 Rooms or Less
VDSL Hospitality 100 Rooms or Less Setup Guide Table of Contents Table of Contents .....................................................................................2 Getting Started..........................................................................................3 What is the network topology in the hotel? ............................................................ 3 How to integrate the VSG-1200, ES-2008 and VES-1124 ........................................ 4 Before You Begin................
VDSL Hospitality 100 Rooms or Less Setup Guide VDSL Hospitality Setup Guide for 100 Rooms or Less Subscriber Gateway • VSG-1200 VLAN Switch • ES-2008 (8 ports) VDSL DSLAM • VES-1124 VDSL Modem • P841-25 Getting Started What is the network topology in the hotel? Nowadays, most of hotels support the Internet service for customers. Some hotels provide the service for free, while others charge users for service.
VDSL Hospitality 100 Rooms or Less Setup Guide How to integrate the VSG-1200, ES-2008 and VES-1124 Here, we will guide you to configure the VSG-1200, ES-2008 and VES-1124 step by step. You can refer these procedures to finish the environment easily, and provide the Internet service to your customer. Before You Begin Before you begin installation, it’s important to understand how the equipment is designed to work and how it should be installed. Why VDSL? VDSL stands for Very fast Digital Subscriber Line.
VDSL Hospitality 100 Rooms or Less Setup Guide Installation Telephone closet preparation One of the trickiest parts with setting up a VDSL network is integrating it with the existing telephone service. Although the ISP will usually take care of installing the Internet connection where you need it, they will not help you install it with your in-building DSL solution.
VDSL Hospitality 100 Rooms or Less Setup Guide Connecting everything together Once you have the proper Telco-50 Connectors in place, and the Internet connection has been installed, you should be ready to connect your equipment. 1. First you should connect your modem to your internet connection (cable, DSL, T1, T3, etc.) if the ISP has not already done so. If you require assistance in doing this, contact your ISP for further help. 2.
VDSL Hospitality 100 Rooms or Less Setup Guide 6. Once you connect the rooms to the VES-1124 via the Telco-50 cables, each room’s telephone port should be ready for modem installation. Install a Prestige 841 VDSL modem in each room by connecting the unit’s “VDSL” port to the room’s telephone wall jack. You can then connect the room’s phone to the “Phone” port on the back of the P841 for voice service.
VDSL Hospitality 100 Rooms or Less Setup Guide 4. Please enter menu 2, and insert the settings for your WAN IP address (the public address provided by your ISP) and DNS Server information. If you don’t know what settings you use, contact your ISP for support. 5. After setting these parameters, please continue press the “Enter” until the console shows “S)ave and return R)eturn without saving M)odify:”. Please type “S” and press “Enter”. Then the system will request to restart.
VDSL Hospitality 100 Rooms or Less Setup Guide System parameters setup 1. After logging in, you will see the following page. 2. Please click the “Configuration Menu >> System Setting >> System” to set the system parameters. First, set the system time.
VDSL Hospitality 100 Rooms or Less Setup Guide 3. Click the “System Setting >> Server” to edit the fields for DHCP server and DNS Server. If you don’t know what values you should set, you can use the default setting; however, for the sake of this guide, set your DHCP starting address to 10.59.1.30, with a pool size of 225 (to provide enough IPs for your access points). You must enter DNS for your local side. If you don’t know, please contact your ISP.
VDSL Hospitality 100 Rooms or Less Setup Guide Billing profile setting 1. Please click the “System Setting >> Billing” to set the billing profile 2. Please click the “Profile Setting >> Edit” to edit the profile’s parameters. You can choose a suitable parameter to meet your needs.
VDSL Hospitality 100 Rooms or Less Setup Guide 3. In the Edit Profile page, you can limit the bandwidth per customer account. 4. After finished the setting, please click the “Apply” to save this configuration. Creating Accounts If you chose Built-In Authentication, then you can create accounts in three ways: • Thermal Printer – You can use the one-button and three-button printer to create dynamic accounts.
VDSL Hospitality 100 Rooms or Less Setup Guide Setup LAN device management You’ll need to add LAN device management entries to administrate devices on the LAN side of the VSG-1200 from the LAN side. Use these steps to set up this feature for your ES-2008 switch: 1. Click on “Advanced Settings >> LAN Devices”. 2. In the first row, you’ll set up an account for you ES-2008 switch. First enter ES-2008 as the Name. Then, type in 60001 as the Virtual Port. Set the Device IP Address to 10.59.1.
VDSL Hospitality 100 Rooms or Less Setup Guide 2. You can change the IP address from web interface. Please from main menu to click the “Administrator >> Network Configuration”, to set the IP address. 3. Please set the IP address to 10.59.1.2, subnet mask to 255.255.255.0, and the gateway to 10.59.1.1. 4. Please click the “Apply” to save the configuration. 5. If you haven’t already done so, set up LAN Device Management in the VSG-1200 for the ES-2008 switch.
VDSL Hospitality 100 Rooms or Less Setup Guide 3. For the rest of this page, you don’t need set any parameters. Click on Apply at the bottom of the page to save this setting. If you are interested, refer to the User’s Guide for further information on additional settings. 4. From the main menu, go to “Administrator >> VLAN Configuration”. 5. Initially there will be no VLAN entries. Because we will need to isolate each VES-1124, each port will need to be on its own VLAN.
VDSL Hospitality 100 Rooms or Less Setup Guide 6. Repeat steps 1-4 for the remaining seven ports, creating a VLAN for each port. When you are finished, your VLAN Configuration menu should look similar to the picture below. This configuration of the ES-2008 is quick and easy to set up and support. If you need to know more details regarding other functions of the ES-2008, please refer to the User’s Guide.
VDSL Hospitality 100 Rooms or Less Setup Guide IP address Setup 1. The VES-1124 default IP address is the 192.168.1.1. You can change the IP address from Web. 2. From main menu to click the “Basic Settings >> IP Setup”, to program the unit’s IP address. Please set the IP address to 10.59.1.3, subnet mask to 255.255.255.0, the gateway to 10.59.1.1, and the DNS to 168.95.1.1. If you don’t know the DNS, you can set the value to the VSG-1200’s IP address. Otherwise, contact your ISP for your DNS information.
VDSL Hospitality 100 Rooms or Less Setup Guide VLAN setup 1. From the main menu, go to “Basic Settings >> Switch Setup”. 2. Please choose “Port Based” in the VLAN type drop-down field. 3. For the rest of this page, you don’t need set any parameters. Click on Apply at the bottom of the page to save this setting. If you are interested, refer to the User’s Guide for further information on additional settings. 4. From the main menu, go to “Advanced Application >> VLAN”. 5.
VDSL Hospitality 100 Rooms or Less Setup Guide 6. Please note on this menu there is also a “CPU” row. This row gives VES-1124 access rights to the corresponding ports. Be default, you will be able to administrate the VES-1124 from ports 25 and 26. DON NOT ALTER THESE SETTINGS unless you are absolutely sure; otherwise, you may inadvertently lock yourself out of the unit. VDSL ports and profile setup You are able to control priority and bandwidth on each VDSL port.
VDSL Hospitality 100 Rooms or Less Setup Guide 3. Please click the “Add” to add a new VDSL profile. 4. In the Basic Settings menu, click the “Port Setup” link to edit the port’s parameters. Each port will have a default name in the Name field, which you may change per your preference for easy reference (i.e.: Room101). Choose the Profile name that you just created in the previous steps (i.e.: Hotel-Guest). Repeat these actions for each port that you need to alter. 5.
VDSL Hospitality 100 Rooms or Less Setup Guide Support Now, if you followed the procedures to setup the VSG-1200, ES-2008 and VES-1124Ls, your Internet service should work in your environment. If you still have any problems, feel free to contact us: North America - ZyXEL Communications Inc. 1130 North Miller Street, Anaheim, CA 92806-2001 U.S.A. Toll Free: +1-800-255-4101 Tel: +1-714-632-0882 Fax: +1-714-632-0858 Email: sales@zyxel.com http://www.us.zyxel.
