User's Manual

Chapter 7 Wireless
P-873HNUP-51B User’s Guide
100
7.6 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Settings > Wireless >
Others. The screen appears as shown.
See Section 7.7.2 on page 103 for detailed definitions of the terms
listed in this screen.
Figure 31 Network Settings > Wireless > Others
The following table describes the labels in this screen.
Release
Configuration
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings
for WPS connections on the ZyXEL Device.
Generate New
PIN Number
The PIN (Personal Identification Number) of the ZyXEL Device is shown here.
Enter this PIN in the configuration utility of the device you want to connect to
using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the ZyXEL Device create
a new PIN.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 19 Network Settings > Wireless > WPS (continued)
LABEL DESCRIPTION
Table 20 Network Settings > Wireless > Others
LABEL DESCRIPTION
RTS/CTS
Threshold
Data with its frame size larger than this value will perform the RTS (Request To
Send)/CTS (Clear To Send) handshake.
Enter a value between 0 and 2347.
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value between
256 and 2346.
Number of
Wireless
Stations Allowed
Specify the maximum number of the wireless stations that may connect to the
ZyXEL Device.