User's Manual

Chapter 13 IGMP
P-873HNUP-51B User’s Guide
184
13.3.1 IGMP Host Limitation Edit
Use this screen to control a LAN host’s access to IGMP services through the ZyXEL Device. Click
Network Settings > IGMP Setting > IGMP Filter and then a LAN host’s Edit icon to open the
following screen.
Figure 80 Network Settings > IGMP Setting > IGMP Filter > LAN Host Edit
The following table describes the fields in this screen.
13.3.2 IGMP Service Add
Use this screen to add or edit an IGMP multicast service domain. Click Network Settings > IGMP
Setting > IGMP Filter > Add a new rule to open the following screen.
Figure 81 Network Settings > IGMP Setting > IGMP Filter > Add a new service
Table 59 Network Settings > IGMP Setting > IGMP Filter > LAN Host Edit
LABEL DESCRIPTION
LAN Host This is the IP address of one of the ZyXEL Device’s LAN hosts.
IGMP Enabled Select whether or not the LAN device using the specified IP address is allowed
to access IGMP services through the ZyXEL Device.
Max Allowed
Channels
Specify to how many IGMP channels the LAN device is allowed to subscribe.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to exit this screen without saving.