User's Manual

P964 APR Cable Router with 802.11g Access Point
Hardware Installation 2-1
Chapter 2
Hardware Installation and Initial Setup
This chapter shows the procedures for installing and starting the P964 APR.
2.1 Front Panel LEDs and Back Panel Ports
The P964 APR provides LEDs as status indicator for diagnostics purpose. The following figure and table
describe the functions of LEDs on the front panel of P964 APR :
Figure 2-1 P964 APR front panel
Table 2-1 P964 APR LED Functions
FUNCTION NAMING COLOR LED DESCRIPTION
Power PWR Green On: Power On
Off: Power Off
System SYS Green
or
Orange
On (Green): System ready and running successfully
On (Orange): System is loading the configuration
On (Green): System rebooting
Off: System not ready
LAN
link/activity
LAN 1~4 Green (10M)
or
Orange (100M)
On: LAN 1~4 Ethernet port link successful
Flashing: LAN 1~4 is Sending or Receiving
Off: LAN 1~4 Ethernet port not ready