User's Manual

P964 APR Cable Router with 802.11g Access Point
3-6 Web Based Management
3.4.2 Web Management – Advanced: IP Filtering
The “IP Filtering” in the “Advanced” page allows users to configure IP address filters in order to block
Internet traffic to specific network devices on the LAN. Click “IP Filtering” icon, the window is shown as
below:
Figure 3-5 Web Management – Advanced: IP Filtering
Users can block specific CPEs to access the Internet. For example, there is a CPE with “192.168.10.20” IP
address, users can set it as ”enabled” in the above window and click “Apply” icon to save the settings. The
CPE can not access the Internet after the IP filtering settings is completed.
3.4.3 Web Management – Advanced: MAC Filtering
“MAC Filtering” allows configuration of MAC address filters in order to block Internet traffic to specific
network devices on the LAN. Click “MAC Filtering” icon, the screen is displayed.