IP Set-Top Box User's Guide

Chapter 4 Product Specifications
STB-1001S2 User’s Guide
36
The following list, which is not exhaustive, illustrates the standards supported in the STB.
Approvals Safety
UL60950-1
CAN/CSA-C22.2 No.60950-1-03
EN60950-1
IEC 60950-1
EMC
FCC Part 15 Class B
EN55022 Class B
EN55024
Distance between wall-
mounting holes on
device’s base panel
137 mm
Screw size for wall
mounting
M4 Tap
Table 11 Firmware Specifications
FEATURE DESCRIPTION
Default IP Address Obtained via DHCP
Default Subnet Mask Obtained via DHCP
Default Password 123456
Device Management Use the remote control and the on-screen menu system to configure the
STB.
Time and Date Get the current time and date from an external server when you turn on
your STB.
PPPoE PPPoE mimics a dial-up Internet access connection.
Table 12 Standards Supported
STANDARD DESCRIPTION
RFC 867 Daytime Protocol
RFC 868 Time Protocol.
RFC 1058 RIP-1 (Routing Information Protocol)
RFC 1112 IGMP v1
RFC 1157 SNMPv1: Simple Network Management Protocol version 1
RFC 1305 Network Time Protocol (NTP version 3)
RFC 1441 SNMPv2 Simple Network Management Protocol version 2
RFC 1483 Multiprotocol Encapsulation over ATM Adaptation Layer 5
RFC 1661 The Point-to-Point Protocol (PPP)
RFC 1723 RIP-2 (Routing Information Protocol)
RFC 1901 SNMPv2c Simple Network Management Protocol version 2c
RFC 2236 Internet Group Management Protocol, Version 2.
RFC 2408 Internet Security Association and Key Management Protocol (ISAKMP)
RFC 2516 A Method for Transmitting PPP Over Ethernet (PPPoE)
Table 10 Hardware Specifications
SPECIFICATION DESCRIPTION