User`s manual

92 Status Registers & Result Codes
Command bit dec hex Function and description Ref.
S38.5, S41.0)
3 3 V.42+MNP4 &K3
4 4 V.42 + V.42bis (compatible
with &K2)
&K4
3-5 0 0 Flow control disabled &H0
24 18 Hardware (RTS/CTS) flow
control
&H3
32 20 Software (XON/XOFF) flow
control
&H4
40 28 Reserved &H5
6-7 Signal quality
0 0 No response to poor signal
quality
*Q0
64 40 Retrain action taken if signal
quality *Q1 is poor
*Q1
128 80 Adaptive rate (auto fall-back
/forward) when signal quality
changes
*Q2
S41.2
192 C0 Disconnect when signal quality
is poor
*Q3
S28= bit dec hex Bit mapped register +068
0 0 0 Single line RJ-11 phone jack
(default)
&J0
1 1 Multiple phone/modem line,
RJ12/RJ13 phone jack
&J1
1 0 0 Panel key is normal (default) &Y0
1 2 Panel key is locked &Y1
2-3 0 0 Destructive, expedited break &Y2
1 4 Non-destructive, expedited
break (default)
10 8 Non-destructive, un-expedited
break