User`s manual

Status Registers & Result Codes 93
Command bit dec hex Function and description Ref.
4-5 0 0 No guard tone &G0
16 10 Reserved &G1
32 20 1800 Hz guard tone &G2
6 0 0 DTE/DCE rate follows link
rate (See also S18, S44b6)
1 64 DTE/DCE rate is fixed at the
DTE setting, range from 300-
460.8 Kbps (default, also see
S18, S44b6)
7 0 0 * Select V.22 for 1200 bps
communication
B0
128 80 Select Bell 212A for 1200 bps
communication
B1
S29= 0-49 0-31 Set default dial phone number
pointer, use AT&Zn=s to store
phone numbers
+000
*D
S31= 0-
255
0-FF Holds the ASCII decimal value
of the XON
+017
S32= 0-
255
0-FF Holds the ASCII decimal value
of the XOFF
+019
S35= bit dec hex Bit mapped register
0 1 1 Use CELL 4800T trells coded
4800 for V.32 4800 (available
with cellular mode only)
1 2 2 Disable aborting from terminal
during modem handshaking
2 4 4 V.26 alternative A. (see also
‘&N11’)
3 8 8 Add 12 dBm attenuation to the
leased line transmission power
4 16 10 When Data/Voice with is
pressed, modem will dial the
*Dn
S29