User`s manual

94 Status Registers & Result Codes
Command bit dec hex Function and description Ref.
default number.
5 32 20 Enable Selective Reject in
V.42 (Default)
6 64 40 Enable password protection to
profile saving. When
‘AT&W0’ is issued, and profile
0 in the NVRAM has this bit
set, the supervisory password
will be requested. This bit in
profile 0 also protects the
supervisory password from a
hardware reset.
*W0
7 128 80 Enable extended numerical
result codes from 50-71 when
an error corrected connection
is made. Use with ATV0. (see
result code table)
V0
S23.6
S36= bit dec hex Bit-mapped register +000
0 0 0 Deny remote request for
configuration (Default)
*F0
1 1 Grant remote request for
configuration
*F1
1 0 0 Write from local profile a to
remote profile b
*Wab
2 2 Read from remote profile b to
local profile a
*Rab
7-5 Security function control
0 0 Disable security function
(Default)
*G0
32 20 Enable type 1 security with
password check. (ZyXEL to
ZyXEL only)
*G1