User`s manual

Status Registers & Result Codes 95
Command bit dec hex Function and description Ref.
64 40 Enable type 1 security with
password check and call-back
(ZyXEL to ZyXEL only)
*G2
96 60 Enable type 2 security with
password check
*G3
128 80 Enable type 2 security with
password check and call-back
*G4
160 A0 Enable type 2 security with
password check and call-back,
remote site enters the call-back
number
*G5
S37= bit dec hex Bit-mapped register for remote
configuration using panel menu
control
+000
3-0 0-5 0-5 Remote profile number *Wab
7-4 0-80 0-50 Local profile number *Rab
S38= bit dec hex Bit mapped register +000
0 1 1 Repeatedly dialing default
number
*Dn
S29
3 8 8 DCD ON/OFF sequence
follows UNIX standard, DCD
high before connect message is
sent, DCD off after last DCE
response is sent
&C1
S21.4
4 16 10 Auto-mode fax receiving
disabled
&N0
5 32 20 Disable MNP5 &Kn
S39= bit dec hex Bit mapped register +000
2 4 4 Answer in originating mode ATA
3 8 8 Class 2 Fax Bitfax
compatibility:
+FCON at 2400 next phase at