User`s manual

96 Status Registers & Result Codes
Command bit dec hex Function and description Ref.
19200
4 16 10 Class 2 Fax mode DTE
shifting:
+FCON at current DTE, shift
to 19,200 when entering into
the next phase
5 32 20 Disable srambler/descrambler
in V.26bis mode. Enables
compatibility with older
V.26bis modems which have
no such unit (default)
S40= bit dec hex Bit mapped register +000
1 2 2 No result code displayed in
answer mode
Q2
2 4 Enables caller ID detection
3 8 Enables type 1 ring detection
4 16 Enables type 2 ring detection
5 32 Enables type 3 ring detection
6 64 Enables type 4 ring detection
S41= bit dec hex Bit mapped register +000
0 1 1 Special MNP compatibility
(see also S27.0, S38.5)
&Kn
2 4 4 Disable retrain abort, up to 5
min. for special satellite line
condition
S27.6
*n
3 8 8 Enable CCITT signals 140 and
141 on EIA-232D interface
4 16 10 In X2-X7 setting, modem
waits for S6 seconds before
dialing and ignores dial tone
detection
5 32 20 DSR follows DCD and pulses &Sn