User`s manual

16 Basic Modem Operation
Pausing During Dialing: ATDT 9,,555 1212
OONOTE: THE PAUSE TIME FOR EACH COMMA IS DEFINED BY S REGISTER S8. DEFAULT IS
2 SECONDS PER COMMA.
Dialing Without Waiting for Dial Tone: ATX0D, 555 1212
Originating a call using an Answer Tone: ATDT 555 1212,,,,,,R
Redialing the Last Number Called: ATDL
Waiting for Five Seconds of Silence: ATDT 800 555 1212 @
123456,1 714 555 1212
Transferring a Call (using flash hook): ATDT! 2468
Auto-Answer and Hook Controls
Enabling Auto-Answer: ATS0=n
OONOTE: IN THIS EXAMPLE, N IS A NUMBER FROM 1 TO 255 THAT CORRESPONDS TO THE
NUMBER OF RINGS AFTER WHICH YOUR MODEM ANSWERS AN INCOMING CALL.
Disabling Auto-Answer: ATS0=0
Manually Answering a Call: ATA
Take modem off-hook: ATH1
Hang up modem (on-hook): ATH0
Manually Disconnecting a Call: +++ATH
Making Your First Connection
In order to check your modem we will use the connection you
created in the Hyper Terminal program to dial the ZyXEL BBS. If
you are using a different terminal program, run the program
according to the instructions provided with it.