User`s manual

52 Fax Operation
Command Value Description
+FDR Receive phase C data command;
initiates document reception.
+FDT=df,vr,wd,
ln
Transmit phase C data command:
release the DCE to proceed with
negotiation.
+FET=n End of page or document command:
n=0 More pages; same document.
n=1 End of document; another document
follows.
n=2 No more pages or documents.
n=4 Procedure interrupt; another page
follows.
n=5 Procedure interrupt; end of document,
another document follows.
n=6 Procedure interrupt; end of document.
+FK Regular fax abort command.
+FLID="string" Local ID string parameter.
+FLO=n Flow control options:
n=0 No flow control.
n=1 Set XON/XOFF software flow
control.
n=2 Set CTS/RTS hardware flow control.
+FLPL=n Document for polling command:
n=0 The DTE has no document available
for polling.
n=1 Indicate a document available for
polling.
+FMDL? Request DCE model .
+FMFR? Request DCE manufacturer .
+FMINSP=n Minimum phase C speed parameter:
n=0 2400 bps.
n=1 4800 bps.
n=2 7200 bps.