User`s manual

82 AT Command Set Summaries
Command Options Function & Description Ref.
*G1 Enable type 1 security, with
password check (ZyXEL to ZyXEL
only)
*G2 Enable type 1 security, with
password check and call back
(ZyXEL to ZyXEL only)
*G3 Enable type 2 security, with
password check
*G4 Enable type 2 security, with
password check and call back
*G5 Enable type 2 security, with
password check and call back,
remote user enters the call back
number
*Hn n=0-49 Modify user password table at
location n.
*HS Modify supervisory password
(Default: “ZyXEL”)
*In Command set selection S17.6-7
*I0 * AT command set
*I1 V.25bis command set
*I2 Dumb mode
*Mn Leased line auto-handshake mode
selection
S14.0
*M0 Set to Originate mode
*M1 Set to Answer mode
*Pn n=0-15
*P9 *
Set leased line transmission power
level; ranges from 0 dBm to -15
dBm (default: -9 dBm) (see also
S35.3)
S17.1-4
*Qn Action taken when line quality
changes.
S27.6-7