- ZyXEL USB Powered Travel Router Manual

24
5.2.3 Configuring your WLAN and Maintenance
Settings
The configuration of wireless and maintenance settings in Access Point mode is the same as for
Router Mode.
• See Chapter 7 for information on the configuring your wireless network.
5.3 AP Mode Status Screen
Click Management > Status to open the Status screen
Table 3 Status Screen: Router Mode
LABEL DESCRIPTION
System Information
Uptime This is the total time the MWR102 has been on.
Firmware Version This is current firmware version.
Firmware Build Time This is the date/time the current version of the firmware was released.
Operation Mode
This is the device mode to which the MWR102 is set – AP Mode.
Wireless Local Network
Network Band
We provide six modes for your selection: 2.4GHz (B), 2.4 GHz
(G), 2.4 GHz (N), 2.4GHz (B+G), 2.4 GHz (G+N), 2.4 GHz
(B+G+N).
You may select one type of network band from the dropdown menu.
SSID (Name)
Shows the current name of your wireless network.
Channel Number
This shows the channel number the MWR102 is currently using over Wireless LAN.