- ZyXEL USB Powered Travel Router Manual

45
The following table describes the labels in this screen.
Table 10 Wireless > Security: WPA-PSK/WPA2-PSK/WPA2-Mixed
LABEL DESCRIPTION
Encryption
Select WPA-PSK, WPA2-PSK or WPA2-Mixed to enable data encryption.
Pre-shared Key
Format
This field allows you to choose between a passphrase and HEX as your Sre-
Shared Key Format.
Pre-Shared Key
WPA-PSK/WPA2-PSK/WPA2-Mixed use a simple common password for
authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Apply Changes
Click Apply Changes to save your changes back to the MWR102.
Reset
Click Reset to reload the previous configuration for this screen.
7.7 Access Control
The Access Control screen allows you to configure the MWR102 to give exclusive access to
devices (Allow) or exclude devices from accessing the MWR102 (Deny). Every Ethernet device
has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory
and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to
know the MAC address of the devices to configure this screen.
To change your MWR102’s MAC filter settings, click Wireless > Access Control. The screen
appears as shown.