- ZyXEL USB Powered Travel Router Manual

68
Table 21
Management > Upgrade Firmware
LABEL DESCRIPTION
Select File
Type in the location of the file you want to upload in this field or click Browse... to
find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two minutes.
Note: Do not turn off the MWR102 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
MWR102 again.
The MWR102 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 31 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware screen.