- ZyXEL USB Powered Travel Router Manual

4 Make sure your computer (with a wireless adapter installed) is within the transmission

range of the MWR102.

5 Check that both the MWR102 and your wireless station are using the same wireless

and wireless security settings.

6 Make sure you allow the MWR102 to be remotely accessed through the WLAN

interface. Check your remote management settings.

• See the chapter on Wireless LAN in the User’s Guide for more information.

I can’t access the Web -Based Configuration Interface after switching to

AP mode.

When you change from router mode to AP mode, your computer must have an IP address in the

range between “192.168.100.3” and “192.168.100.254”.

Refer to Appendix C for instructions on how to change your computer’s IP address.

The following tables summarize the MWR102’s hardware and firmware features.