User guide

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
241
<ip-address>
<mask>
manageable
Allows the switch to be managed using this
specified IP address.
13
default-
gateway <ip-
address>
Sets a default gateway IP address for this
VLAN.
13
inband-default
<ip-address>
<mask>
Sets a static in-band IP address and subnet
mask.
13
inband-default
dhcp-bootp
<cr>
Sets the dynamic in-band IP address. 13
inband-default
dhcp-bootp
release
Releases the dynamic in-band IP address. 13
inband-default
dhcp-bootp
renew
Updates the dynamic in-band IP address. 13
name <name-
str>
Specifies a name for identification purposes. 13
no fixed <port-
list>
Sets fixed port(s) to normal port(s). 13
forbidden
<port-list>
Sets forbidden port(s) to normal port(s). 13
inactive Enables the specified VLAN. 13
ip address
<ip-address>
<mask>
Deletes the IP address and subnet mask in
this VLAN.
13
ip address
default-
gateway
Deletes the default gateway in this VLAN. 13
ip address
inband-default
dhcp-bootp
Sets the default in-band interface to use a
static IP address in this VLAN.
The switch will use the default IP address of
0.0.0.0 if you do not configure a static IP
address.
13
untagged
<port-list>
Specifies the port(s) you want to tag all
outgoing frames transmitted with this VLAN
Group ID.
13
normal <port-
list>
Specifies the port(s) to dynamically join this
VLAN group using GVRP
13
untagged
<port-list>
Specifies the port(s) you don’t want to tag all
outgoing frames transmitted with this VLAN
Group ID.
13
Table 86 vlan Commands (continued)
COMMAND DESCRIPTION P