User's Manual

ManualsBrandsZyXEL Communications ManualsElectronicsDual-Band Wireless AC/N VDSL2 Combo WAN Gigabit Gateway with USB

 5 GHz 11ac (3x3) for

smooth, optimized

HD IPTV services

everywhere

 2.4 GHz 11n (2x2) for

superior

performance and

coverage

 Extreme routing

performance for FTTx

applications

 VDSL2 vectoring for

maximized service

coverage

 Combo WAN-in-a-box

for optimized CAPEX

in FTTH/VDSL2

deployments

 3G dongle support

 Intelligent CoC saves

energy with rich

green features

VMG3925-B10A

Dual-Band Wireless AC/N VDSL2 Combo WAN

Gigabit Gateway with USB

Benefits

G.vector to optimize performance and CAPEX

The VMG3925-B10A supports Vectoring technology that

eliminates cross-talk or interference among different

VDSL lines. With the mechanism, Vectoring significantly

increases the bit rates to compete with cable/fiber

technology as well as to enlarge the service coverage

without changing the current infrastructure—a way to

save cost significantly comparing to fiber-to-the-home

(FTTH) deployments and CAPEX can also be optimized

by the improved data rates and coverage without

upgrading the equipment.

Combo WAN for simplified ISP logistics and optimized

CAPEX

With the VMG3925-B10A, there’s no need for service

providers to invest on and replace new CPEs at

customer sites when customers migrate from ADSL2+ or

VDSL2 to PON or LTE; all they need to do is to unplug

the DSL line, and then plug the Ethernet cable to the

Ethernet WAN port as the existing CPE. VMG3925-B10A

will be used to terminate the IP connections via the

WAN interface. In most cases, users can still connect

with the original CPE to avoid replacing the unit due to

the difference of physical connections.

Summary of content (7 pages)

PAGE 1
5 GHz 11ac (3x3) for smooth, optimized HD IPTV services everywhere 2.4 GHz 11n (2x2) for superior performance and coverage Extreme routing performance for FTTx applications VDSL2 vectoring for maximized service coverage Combo WAN-in-a-box for optimized CAPEX in FTTH/VDSL2 deployments 3G dongle support Intelligent CoC saves energy with rich green features VMG3925-B10A Dual-Band Wireless AC/N VDSL2 Combo WAN Gigabit Gateway with USB Benefits G.
PAGE 2
802.11ac technology for extreme performance and coverage The VMG3925-B10A features 802.11ac technology to provide the ultimate solution for both speed and coverage. With 802.11ac wireless data rates of up to 1.3 Gbps, the VMG3925-B10A provides stable, reliable wireless connections for high-speed data and multimedia usages. The 802.11ac technology empowered the device to eliminate dead zones and extend coverage while retaining backward compatibility with any Wi-Fi certified device.
PAGE 3
• • • 6-bit DiffServ Code Point (DSCP, RFC 2474) 802.1P 3-bit Class of Service (CoS) 802.1Q 12-bit VLAN ID • Management • Router/Bridge Features • • IEEE 802.
PAGE 4
Application Diagram Certifications Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operations. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
PAGE 5
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement • • • • This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. IEEE 802.11b, 802.11g or 802.11n (20MHz) operation of this product in the U.S.
PAGE 6
This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-192 d'Industrie Canada applicable aux appareils radio exempts de licence.
PAGE 7
America or 230V AC in Europe). . Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. . Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution. . If the power adaptor or cord is damaged, remove it from the device and the power source. . Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one. .