User`s guide

Prestige 334 User’s Guide
49 Chapter 3 Wizard Setup
Refer to the appendix for more information on PPTP.
Figure 8 Wizard 2: PPTP Encapsulation
The following table describes the fields in this screen
Note: The PRESTIGE supports one PPTP server connection at
any given time.
Table 4 Wizard 2: PPTP Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation Select PPTP from the drop-down list box.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Nailed-Up
Connection
Select Nailed-Up Connection if you do not want the connection to time out.
Idle Timeout Type the time in seconds that elapses before the router automatically disconnects
from the PPTP server. The default is 100 seconds.
PPTP Configuration
My IP Address Type the (static) IP address assigned to you by your ISP.
My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Address Type the IP address of the PPTP server.