User`s guide

Prestige 334 User’s Guide
Chapter 3 Wizard Setup 52
You can configure the WAN port's MAC address by either using the factory default or cloning
the MAC address from a computer on your LAN. Once it is successfully configured, the
address will be copied to the "rom" file (ZyNOS configuration file). It will not change unless
you change the setting or upload a different "rom" file.
The fifth wizard screen varies according to the type of encapsulation that you select in the
third wizard screen.
Figure 9 Wizard 3: WAN Setup
The following table describes the labels in this screen
Table 6 Example of Network Properties for LAN Servers with Fixed IP Addresses
Choose an IP address 192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.
Subnet mask 255.255.255.0
Gateway (or default route) 192.168.1.1(Prestige LAN IP)
Table 7 Wizard 3: WAN Setup
LABEL DESCRIPTION
WAN IP Address Assignment
Get automatically from
ISP
Select this option If your ISP did not assign you a fixed IP address. This is
the default selection.
Use fixed IP address Select this option If the ISP assigned a fixed IP address.
My WAN IP Address Enter your WAN IP address in this field if you selected Use Fixed IP
Address.
My WAN Subnet Mask Type your IP subnet mask in this field when you selected Use Fixed IP
Address.