Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
Introduction to Firewalls 11-5
2-a SYN Attack floods a targeted system with a series of SYN packets. Each packet causes the
targeted system to issue a SYN-ACK response. While the targeted system waits for the ACK that
follows the SYN-ACK, it queues up all outstanding SYN-ACK responses on what is known as a
backlog queue. SYN-ACKs are moved off the queue only when an ACK comes back or when an
internal timer (which is set at relatively long intervals) terminates the three-way handshake. Once
the queue is full, the system will ignore all incoming SYN requests, making the system unavailable
for legitimate users.
Figure 11-3 SYN Flood
2-b In a LAND Attack, hackers flood SYN packets into the network with a spoofed source IP
address of the targeted system. This makes it appear as if the host computer sent the packets to
itself, making the system unavailable while the target system tries to respond to itself.
3. A brute-force attack, such as a "Smurf" attack, targets a feature in the IP specification known as
directed or subnet broadcasting, to quickly flood the target network with useless data. A Smurf hacker
floods a router with Internet Control Message Protocol (ICMP) echo request packets (pings). Since the
destination IP address of each packet is the broadcast address of the network, the router will broadcast
the ICMP echo request packet to all hosts on the network. If there are numerous hosts, this will create a
large amount of ICMP echo request and response traffic. If a hacker chooses to spoof the source IP
address of the ICMP echo request packet, the resulting ICMP traffic will not only clog up the
"intermediary" network, but will also congest the network of the spoofed source IP address, known as
the "victim" network. This flood of broadcast traffic consumes all available bandwidth, making
communications impossible.