Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
Remote Management 13-3
13.3 Configuring TELNET
Click ADVANCED and then REMOTE MGNT to open the TELNET screen.
Figure 13-2 Telnet
The following table describes the labels in this screen.
Table 13-1 Telnet
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyAIR using this
service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate with the ZyAIR
using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Apply
Click Apply to save your changes back to the ZyAIR.
Reset
Click Reset to begin configuring this screen afresh.