Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
18-2 General and WAN Setup
Figure 18-1 Menu 1 General Setup
Step 2. Fill in the required fields. Refer to the table shown next for more information about these fields.
Table 18-1 Menu 1 General Setup
FIELD DESCRIPTION EXAMPLE
System Name Choose a descriptive name for identification purposes. This name
can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes “-” and underscores "_" are accepted.
ZyAIR
Domain Name Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domainname" to see the current domain
name used by your gateway.
If you want to clear this field just press the [SPACE BAR]. The domain
name entered by you is given priority over the ISP assigned domain
name.
zyxel.com.tw
First System DNS
Server
Second System
DNS Server
Third System DNS
Server
Press [SPACE BAR] to select From ISP, User Defined or None and
press [ENTER].
From ISP
IP Address Enter the IP addresses of the DNS servers. This field is available
when you select User-Defined in the field above.
N/A
Menu 1 - General Setup
System Name=
Domain Name= zyxel.com.tw
First System DNS Server= From ISP
IP Address= N/A
Second System DNS Server= From ISP
IP Address= N/A
Third System DNS Server= None
IP Address= N/A
Edit Dynamic DNS= No
Press ENTER to Confirm or ESC to Cancel: