Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
21-2 Remote Node Configuration
Figure 21-1 Menu 11.1 Remote Node Profile
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
Table 21-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Rem Node Name Type a unique, descriptive name of up to eight characters for this
node.
ChangeMe
Active
Press [SPACE BAR] and then [ENTER] to select No to deactivate
this node. Inactive nodes are displayed with a minus sign “–“ in
SMT menu 11.
Yes
(default)
Encapsulation
Press [SPACE BAR] to select from Ethernet, PPPoE or PPTP and
press [ENTER].
Ethernet
Service Type Press [SPACE BAR] and then [ENTER] to select the service type.
Choose a RoadRunner flavor if your ISP is using Time Warner's
RoadRunner; otherwise choose Standard. The User Name,
Password and Login Server IP Address fields are not applicable
(N/A) for the latter.
Choose from Standard, Telstra (RoadRunner Telstra or BigPond
authentication method), RR-Manager (RoadRunner Manager
authentication method) or RR-Toshiba (RoadRunner Toshiba
authentication method).
Standard
Service Name
When using PPPoE encapsulation, type the name of your PPPoE
service here.
N/A
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= PPTP Edit IP= No
Service Type= Standard Telco Option:
Service Name= N/A Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login= Schedules=
My Password= ******** Nailed-Up Connection= No
Authen= CHAP/PAP
PPTP: Session Options:
My IP Addr= Edit Filter Sets= No
My IP Mask= Idle Timeout(sec)= 100
Server IP Addr=
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel: