Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
NAT 23-11
23.4.2 Example 2: Internet Access with an Inside Server
Figure 23-11 NAT Example 2
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and then go to
menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.
Figure 23-12 Menu 15.2.1 NAT Server Setup
23.4.3 Example 3: Multiple Public IP Addresses With Inside Servers
In this example, there are 3 IGAs from our ISP. There are many departments but two have their own FTP
server. All departments share the same router. The example will reserve one IGA for each department with
Menu 15.2 - NAT Server Setup
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 192.168.1.10
2. 0 0 0.0.0.0
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 0 0 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: