Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
SNMP Configuration 25-1
Chapter 25
SNMP Configuration
This chapter explains SNMP Configuration menu 22.
25.1 SNMP Configuration
To configure SNMP, select option 22 from the main menu to open Menu 22 – SNMP Configuration as
shown next. The “community” for Get, Set and Trap fields is SNMP terminology for password.
Figure 25-1 Menu 22 SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 25-1 Menu 22 SNMP Configuration
FIELD DESCRIPTION EXAMPLE
SNMP:
Get Community
Type the Get Community, which is the password for the incoming
Get- and GetNext requests from the management station.
public
Set Community
Type the Set Community, which is the password for incoming Set
requests from the management station.
public
Trusted Host If you enter a trusted host, your ZyAIR will only respond to SNMP
messages from this address. A blank (default) field means your
ZyAIR will respond to all SNMP messages it receives, regardless
of source.
0.0.0.0
Trap:
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: