Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
Call Scheduling 31-3
Table 31-1 Menu 26.1 Schedule Set Setup
FIELD DESCRIPTION EXAMPLE
Once:
Date
If you selected Once in the How Often field above, then enter the date
the set should activate here in year-month-date format.
2000-01-01
Weekday:
Day
If you selected Weekly in the How Often field above, then select the
day(s) when the set should activate (and recur) by going to that day(s)
and pressing [SPACE BAR] to select Yes, then press [ENTER].
Start Time Enter the start time when you wish the schedule set to take effect in
hour-minute format.
09:00
Duration Enter the maximum length of time this connection is allowed in hour-
minute format.
08:00
Action
Forced On means that the connection is maintained whether or not
there is a demand call on the line and will persist for the time period
specified in the Duration field.
Forced Down means that the connection is blocked whether or not
there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand
call on the line. Disable Dial-On-Demand means that this schedule
prevents a demand call on the line.
Forced On
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or
PPTP in the Encapsulation field and then press [ENTER] to make the schedule sets field available as
shown next.