User`s guide

ZyWALL IDP 10 User’s Guide
Chapter 6 IDP Policies 76
6.6.1 Configuring a User-defined IDP Policy
All “policy attributions” have a logical AND relationship, that is, all “policy attributions”
criteria must be met before a match is deemed found. Similarly, all “packet contents” have a
logical AND relationship, that is, all “packet contents” criteria must be met before a match is
deemed found. “Policy attributions” and “packet contents” also have a logical AND
relationship, that is, both of the criteria (“policy attributions” and “packet contents”) must be
met before a match is deemed found. From Figure 43 on page 74, click Insert to create a new
user-defined IDP policy.
Move Type the rule number that should be moved in the first textbox (that follows this
label), type the index number it should be moved to in the second textbox and then
click Move to rearrange this rule. Rule ordering is important as rules are applied in
turn.
Apply Click this button to save your changes back to the ZyWALL.
Table 19 User-defined Policies (continued)
LABEL DESCRIPTION