User`s guide

ZyWALL IDP 10 User’s Guide
81 Chapter 6 IDP Policies
6.7 Registering your ZyWALL
Use the Registration screen to enable IDP service on the ZyWALL. You need to do this
before you update new policies. Follow this procedure to do this.
1 Go to http://www.myZyXEL.com
, ZyXEL Communications online services center.
2 If you have not already done so for another ZyXEL product, create a myZyXEL.com
account containing a login name and password. You will need a valid e-mail address to
which a subscription code is sent that validates your e-mail address and login name/
password.
3 Register your ZyXEL product, for example the ZyWALL IDP 10. You will need the
product serial number and authentication code (product MAC address), which should be
found on a label in the package that contained the product.
4 After you have registered the product, go to the product details and click the intrusion
policy service Activate
1
link.
5 A screen then displays showing an Activation Key. This information is also sent to your
myZyXEL.com-registered e-mail address. Store this e-mail for future reference.
6 Log into the ZyWALL web configurator; click IDP and then the Registration tab to
display the screen as shown next.
7 Paste the generated key into the Registration screen
1
and click Apply.
1. Actual label names are liable to change, but the intent should remain the same. These are the label names used at
the time of writing.